Full Automatic Oil Liquid Blister Packaging Honey Chocolate Sauce Cream Syrup Honey Jelly Cup Food Blister Packing Machine

The machine is suitable for capsule,tablet,big honey pill,candy,liquid,paste,syringe as well as irregular shape Al-plastic,paper-plastic composite and Al-Al sealing packing in pharmacy,healthcare,food,cosmetics,medical equipment industry etc, fully comply with"GMP".

1)Our DPP series aluminum-plastic packaging machine can be disassembled for transportation, and it is easy to assemble by applying cylindrical pin for positioning and screws for fastening.
2)The molds are pressed and clamped by the pressing plate, which makes assembly and disassembly very convenient.
3)The main motor adopts variable frequency speed control: The corresponding blanking times should be set according to the stroke length and the feeding difficulty of the filling materials. (The blanking times can reach 50 times / min).
4) The mechanical arm clamping traction mechanism is adopted to ensure stable operation and accurate synchronization. The stroke length can be adjusted in the range of 30~120mm, which means that the plate size can be designed at will within this range. Because of aligning and heating by contact, the heating power and temperature are reduced, the energy is saved and the stability of plastic sheet is increased.
5)The forming heating plate closes and opens automatically. The start-up time can be delayed after the heating plate is put down, so no more than one sheet of materials will be wasted.
6)It is equipped with cylinder and chequered plate at the heat seal station. When the machine is stopped, the cylinder will automatically raise the chequered plate, which helps avoid the deformation of blisters caused by thermal radiation and also facilitates the cleaning of checkered plate. At the same time, it plays a buffer role in overpressure, which contributes to prolonging the service life of the machine.
7)The upper and lower chequered stripes with netted dots cooperate for heat sealing. As there is equal stress on both sides, the sheets are smoother and the sealing performance is improved.
8)If PVC runs out or breaks off, the alarm rings automatically and the machine shuts down immediately. Besides, the machine is equipped with emergency stop device, which improves the safety of operators during the process of debugging and replacing molds.
9)The feeding hopper and all the other parts in contact with materials are made of stainless steel and non-toxic materials, meeting the requirements of GMP.